Download & Install Problems

[blazo]

This thread was made to help troubleshoot any problems that may occur during the download process or the installation of Crowns of Power on to your computer.

Attached are screen shots of 2 errors that can be fixed by downloading the updated drivers from Microsoft. Links are provided on the CoP Downloads Page: http://www.crownsofpower.com/downloads.php

Please describe the problem you are having and provide links to screen shots if possible.

[April]

After downloading CoP version 1.0.0, Double clicking the .exe file to "run" the program does nothing., so the program does not reach the "install" stage.

[TeQuiLa]

nstalled cop under c:\games\crowns of power
When i press the "play" button it gives the following error :
anyone got a clue why its not working?


System.ComponentModel.Win32Exception: Exe could not be started because the configuration is wrong next to eachother. Check the log exe for more info.

bij System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
bij System.Diagnostics.Process.Start()
bij Launcher.Form1.button1_Click(Object sender, EventArgs e)
bij System.Windows.Forms.Control.OnClick(EventArgs e)
bij System.Windows.Forms.Button.OnClick(EventArgs e)
bij System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
bij System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bij System.Windows.Forms.Control.WndProc(Message& m)
bij System.Windows.Forms.ButtonBase.WndProc(Message& m)
bij System.Windows.Forms.Button.WndProc(Message& m)
bij System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
bij System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
bij System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Geladen assembly's **************
mscorlib
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly-versie: 1.0.0.0
Win32-versie: 1.0.0.0
CodeBase: file:///C:/crowns%20of%20power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Windows.Forms.resources
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_nl_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
mscorlib.resources
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------




I got windows Vista , 3.16 intel dual core and a 8800 gts geforce vc-card. the whole installation went perfect exept for when i press the "play" button it gives the error above

[blazo]

April,

Can you try deleting that file and then downloading it again from scratch. We have updated the download link and this may fix your problem.

http://70.32.114.217/CoP_1.0.0.exe

Please let me know it that works.

[deadandtired]

intall went fine but when trying to launch i keep getting 'error connecting to patch server'.
what can i do?

[hyepride14]

nstalled cop under c:\games\crowns of power
When i press the "play" button it gives the following error :
anyone got a clue why its not working?


System.ComponentModel.Win32Exception: Exe could not be started because the configuration is wrong next to eachother. Check the log exe for more info.


getting that same error and just uninstalled and installed back... still doesnt work :/

[Neubie]

I'm having the same issue as hypride. heres a link to a SS of the errors im getting.


http://i466.photobucket.com/albums/rr22/Neubie1/error1.jpg

[hyepride14]

yup thats the exact error. installing new .NET right now lets see if that fixes the issue

[Neubie]

I installed the new .NET just yesturday..so I doubt that will work.. But let me know.

[hyepride14]

no luck... installed frame 3.5 and still same error

[blazo]

Are you using windows vista? Try right clicking and run "as administrator". I am kind of reaching here and will continue to look into this problem until it is solved. Anyone else seen this error and then was able to fix it?

[blaze]

Just installed CoP today install went fine and it updated fine but when i clicked Play i got the following Error Message:

(This is on Windows Vista Home Premium 6.0 by the way)
(I have unintalled and reinstalled already)

************** Exception Text **************
System.ComponentModel.Win32Exception: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
at System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at Launcher.Form1.button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Crowns%20of%20Power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Any help would be great...

Thanks,
Blaze

[hypnotize]

The install went ok, and the program updated itself. Now, when I double click the icon, it takes about 30 seconds for it to load, then my monitor flashes once, and nothing happens. I waited for 5 minutes for something to load, and nothing. I hit ctrl + alt + del and CoP.exe was using 99% of the processes.

I don't know if this is normal for it to load the first time or what, but can someone explain why? Thanks.

[5iv3]

I already download and install successful but when i try to login there is errors message say:
Your connection to the server timed out. what can i do ? There is no problem with my internet connection.

[Antitrust]

The install went ok, and the program updated itself. Now, when I double click the icon, it takes about 30 seconds for it to load, then my monitor flashes once, and nothing happens.


Same thing happens with me does anyone know how to fix this problem? Its really annoying cos i want to play it. :(

[mstic knight]

when i click crowns of power it gives the error:

C:\WINDOWS\Microsoft.NET\Framework\v2.0.5072\mscor wks.dll couldn't be loaded.

what does this mean, how do i fix it?

[blazo]

Blaze and others,

Be sure you have the latest version Microsfto Framework v3.5 installed. Blaze from your report it looks like you have 2.0 installed.

CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll

Please click this link to download the latest version from Microsoft website for free:

http://www.microsoft.com/downloads/details.aspx?FamilyID=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en

Let me know if it works after doing that.

[mstic knight]

blazo what exactly do i do? im not sure what u told me 2 do

[blazo]

I already download and install successful but when i try to login there is errors message say:
Your connection to the server timed out. what can i do ? There is no problem with my internet connection.

When you first load CoP try going to option and then turning down the detail level and the view distance in your graphics and game play menus.

This problem happens to a friend of mine who is on a laptop, it will hang at 98% and time out. This is a know issue and trying to login again you should get in eventually. We are actively trying to figure out why this is happening, let me know if you are able to get in!

[mstic knight]

i downloaded that link and saved it in c drive/ program files/ crowns of power
it didnt work

[blazo]

blazo what exactly do i do? im not sure what u told me 2 do

It appears you are running an old version of some Microsoft drivers that are required to play Crowns of Power.

Please download and install the new drivers from Microsoft for free by going here:

http://www.microsoft.com/downloads/details.aspx?FamilyID=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en

[mstic knight]

so i downloaded it, it asked me where 2 save, so i saved it in the CoP file. then what?

[soppe]

yeh ...
i use vista

but during the game play ... there are certain times when suddenly every one just disappears .. i know they are there but i cant sea them at all .. the buildings stay .. just the characters and the mobs disappear ..

also the lag is quite a lot

[PainIsGreat]

after downloading and i want to open the file i get this error :
This file contains invalid data

what do i have to do?

[soppe]

after downloading and i want to open the file i get this error :
This file contains invalid data

what do i have to do?

The way to solve this problem is you need to delete your original CoP download, and then download the game again ... then click on the file where you have saved it and click run as administrator if you have that option when you right mouse click on it. Though only do this when the download has finished

[marmite369]

The way to solve this problem is you need to delete your original CoP download, and then download the game again ... then click on the file where you have saved it and click run as administrator if you have that option when you right mouse click on it. Though only do this when the download has finished

done and still didn't work any other ideas

[Pat2]

I downloaded and INSTALLED the latest version of .net

I downloaded and installed the latest upgrades to MicroSoft operating system (I have XP Pro).

I downloaded the MicroSoft recommended Creative audio files as well, even though my system has no real use for them other than for Crowns of Power, which seems to like them very much.

I deleted all of my "prefetch" files, ran a registry check and fixed all issues. I deleted all of the unneeded cookies and log files that the operating system generates. I "flushed" my RAM or wiped it clean to clear any deframented items. I defraged my hard drives. Then "cold booted" my system to start fresh.

I am no longer having launcher problems.

I am also getting framerates that average 65 when others are having lag issues and very low framerates in the teens and below. I am not saying that this is a cure, but it seemed to work for me.

Pat

[blaze]

I installed .NET Frameworks 3.5 and im still getting the same error.

[3ewy]

after installing cop , i run the game it makes an update then says play i press play it gives a black screen and then gets me back to windows and the computer freezes , could that be a problem of running it on vista? cause i checked the vid card and ram and they are up to date

[blazo]

so i downloaded it, it asked me where 2 save, so i saved it in the CoP file. then what?

Now open up Windows Explorer, and browse to the directory you saved the file. You must double click and run this file and install the Microsoft framework update. Once the install is complete, restart your computer and try running Crowns of Power again.

[blazo]

The install went ok, and the program updated itself. Now, when I double click the icon, it takes about 30 seconds for it to load, then my monitor flashes once, and nothing happens. I waited for 5 minutes for something to load, and nothing. I hit ctrl + alt + del and CoP.exe was using 99% of the processes.

I don't know if this is normal for it to load the first time or what, but can someone explain why? Thanks.

I have this problem randomly with AOL Instant Messenger on my laptop. Try restarting your computer and then use Windows Explorer to find the directory Crowns of Power was installed and manually double click the Launcher.exe icon.

If this works try creating a new shortcut to use.

[blazo]

I already download and install successful but when i try to login there is errors message say:
Your connection to the server timed out. what can i do ? There is no problem with my internet connection.

I also have this happen to me from time to time on my laptop. I think it is because all of your memory is being used up and it can't finish loading the zone before the timeout kicks you out.

Try closing some other programs to free up some memory, or even closing unused processes from the control-alt-del task manager.

Also be sure to go to the options menu and decrease your view distance, this will GREATLY improve performance when you do get into the game. Try lowering the detail level under the graphics tab as well.

Do that and give it a couple tries, restart your computer to clear the memory and close everything you are not using.

[blazo]

I installed .NET Frameworks 3.5 and im still getting the same error.

There seems to be a bunch of people are having the same exact problem.

If anyone has more info on the "System.ComponentModel.Win32Exception: The application has failed to start because its side-by-side configuration is incorrect." error, please send more info to us. If you had this error and were able to fix it, let us know what you did so we can help others!

--

Can you tell me more about your operating environment.

What version of windows are you running?

What Service Pack are you running? SP1, SP2?

What are the hardware specs of your machine. Video card, memory, processor speed etc.

[blazo]

yeh ...
i use vista

but during the game play ... there are certain times when suddenly every one just disappears .. i know they are there but i cant sea them at all .. the buildings stay .. just the characters and the mobs disappear ..

also the lag is quite a lot

Try again with your detail and view distance settings turned all the way down. These can be found in the CoP Menu under Options.

[blazo]

after downloading and i want to open the file i get this error :
This file contains invalid data

what do i have to do?

Delete that file and then download it again from scratch. We have updated the download link and this should fix your problem.

http://70.32.114.217/CoP_1.0.0.exe

[blaze]

There seems to be a bunch of people are having the same exact problem.

If anyone has more info on the "System.ComponentModel.Win32Exception: The application has failed to start because its side-by-side configuration is incorrect." error, please send more info to us. If you had this error and were able to fix it, let us know what you did so we can help others!

--

Can you tell me more about your operating environment.

What version of windows are you running?

What Service Pack are you running? SP1, SP2?

What are the hardware specs of your machine. Video card, memory, processor speed etc.

System Information
------------------
Time of this report: 8/31/2008, 20:45:26
Machine name:**********
Operating System: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_gdr.071023-1545)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: Presario F500 (RZ340UA#ABA)
BIOS: PhoenixBIOS 4.0 Release 6.1
Processor: AMD Turion(tm,1=4 Mobile Technology MK-36, ~2.0GHz
Memory: 958MB RAM
Page File: 944MB used, 1219MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6000.16386 32bit Unicode

Display Devices
---------------
Card name: NVIDIA GeForce Go 6100
Manufacturer: NVIDIA
Chip type: GeForce Go 6100
DAC type: Integrated RAMDAC
Device Key:**********
Display Memory: 281 MB
Dedicated Memory: 58 MB
Shared Memory: 223 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: nvd3dum.dll
Driver Version: 7.15.0011.6743 (English)
DDI Version: 9Ex
Driver Attributes: Final Retail
Driver Date/Size: 11/7/2007 02:35:00, 5263360 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier:********
Vendor ID: 0x10DE
Device ID: 0x0247
SubSys ID: 0x30B7103C
Revision ID: 0x00A2
Revision ID: 0x00A2
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_B ModeWMV9_B ModeVC1_A ModeWMV9_A

That enough info?

[Frozt007]

I get a different launcher problem. It crashes as soon as I run the application.

I have update .NET Framework, and Windows Installer. I've never had this problem before:

http://img136.imageshack.us/img136/8540/coplaunchererroryq2.jpg

Any help :o?

[klepton]

im getting a torque memory error

Error allocating memory. Shutting down.

after i click ok i get


the instruction at "0x7c901010" referenced memory at "0x08d80064". The momory could not be "read". Click OK to terminate the program


what should i do to fix it??

[Neubie]

Here is the link to a screen shot of the error i'm getting.

http://i466.photobucket.com/albums/rr22/Neubie1/error1.jpg

What I did to fix it was, re-download .NET (I had just downloaded it the day before). I then also downloaded IE 8.

I can play now. I know atleast 1 other person was having this issue, give it a go and see if it helps :-)


-Musket

[milfedayinx3]

see my post "How to fix Launch problems" in "COP General Discussion section" this fix this problems.

[frosty_lizard]

nstalled cop under c:\games\crowns of power
When i press the "play" button it gives the following error :
anyone got a clue why its not working?


System.ComponentModel.Win32Exception: Exe could not be started because the configuration is wrong next to eachother. Check the log exe for more info.

bij System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
bij System.Diagnostics.Process.Start()
bij Launcher.Form1.button1_Click(Object sender, EventArgs e)
bij System.Windows.Forms.Control.OnClick(EventArgs e)
bij System.Windows.Forms.Button.OnClick(EventArgs e)
bij System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
bij System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bij System.Windows.Forms.Control.WndProc(Message& m)
bij System.Windows.Forms.ButtonBase.WndProc(Message& m)
bij System.Windows.Forms.Button.WndProc(Message& m)
bij System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
bij System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
bij System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Geladen assembly's **************
mscorlib
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly-versie: 1.0.0.0
Win32-versie: 1.0.0.0
CodeBase: file:///C:/crowns%20of%20power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Windows.Forms.resources
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_nl_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
mscorlib.resources
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------




I got windows Vista , 3.16 intel dual core and a 8800 gts geforce vc-card. the whole installation went perfect exept for when i press the "play" button it gives the error above

--Your problem is vista...-_-

also --> Rampid Gaming Forums

Welcome, frosty_lizard.
You last visited: 12-31-1969 at 07:00 PM
Private Messages: Unread 0, Total 0.

LMAO :P

[buffalo0723]

i have read and reread these forums and have not found anything that can help;( can someone any one help? I have down loaded everything and when i click the play button it still comes up error? System.ComponentModel.Win32Exception: Exe could not be started because the configuration is wrong next to eachother. Check the log exe for more info.

bij System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
bij System.Diagnostics.Process.Start()
bij Launcher.Form1.button1_Click(Object sender, EventArgs e)
bij System.Windows.Forms.Control.OnClick(EventArgs e)
bij System.Windows.Forms.Button.OnClick(EventArgs e)
bij System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
bij System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
bij System.Windows.Forms.Control.WndProc(Message& m)
bij System.Windows.Forms.ButtonBase.WndProc(Message& m)
bij System.Windows.Forms.Button.WndProc(Message& m)
bij System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
bij System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
bij System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Geladen assembly's **************
mscorlib
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly-versie: 1.0.0.0
Win32-versie: 1.0.0.0
CodeBase: file:///C:/crowns%20of%20power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Windows.Forms.resources
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_nl_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
mscorlib.resources
Assembly-versie: 2.0.0.0
Win32-versie: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------

[me_chimp]

i deleted cop and reinstalled and got the new .net 3.5. what else can i check

after i download it and click on launcher to open cop up i get this error....

unhandled exception has occured in your applicaion. if u click continue,the application will ignore this error and attempt to continue. if u click quit,the application will close immediately.....The application has failed to start because its side-by-side configuration is incorrect. Please see the application even log for more detail


See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ComponentModel.Win32Exception: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
at System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at Launcher.Form1.button1_Click(Object sender, EventArgs e)
at Launcher.Form1.AutoStartTimer_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr oc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Crowns%20of%20Power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

[Aragonfire]

I have the same problem as klepton.

When I try to start the game, the game appears on a black screen for a split second, then goes back to Windows.

After a few minutes I get an error message saying that there is not enough memory.


What can I do to make it work, or when can you fix this?

My operator system is Windows Vista.

[blaze]

Just installed CoP today install went fine and it updated fine but when i clicked Play i got the following Error Message:

(This is on Windows Vista Home Premium 6.0 by the way)
(I have unintalled and reinstalled already)

************** Exception Text **************
System.ComponentModel.Win32Exception: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
at System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at Launcher.Form1.button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Crowns%20of%20Power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.312 (rtmLHS.050727-3100)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Any help would be great...

Thanks,
Blaze



i still get this same error has anyone been able to fix this?

[Dakarith]

I had the application downloaded but I was getting major problems with it so I deleted it and went to download it again. Now I get an error saying "This file contains invalid data."
I can't really tell you anything more than that. I have no clue what Im doing really. Sorry

[SyMaster]

im getting a torque memory error

Error allocating memory. Shutting down.

after i click ok i get


the instruction at "0x7c901010" referenced memory at "0x08d80064". The momory could not be "read". Click OK to terminate the program


what should i do to fix it??

i am having the same issue

[Dakarith]

Now when I try to download it and I get it all saved it wont run at all. When I click run it just sits here and does nothing. :(

[Dakarith]

SO I realised after reading through this that my problem was also experienced by another player so I deleted every file I had on COP from my computer and used the link in the reply to April with the updated version. I still get it downloading faster than it should (Superfast like it is still there actually) and when I click run it still dosnt run. Please help me

Thanks for your time :D

[Dakarith]

I think my computer isnt downloading all the files there. I am only downloading about 235 kb of info from your DL and Installation page. I dont know why this is hapening cause the first time I tried it went superbly. I would really appriciate some help here.

[me_chimp]

i wished admin would reply to let some of us know what the problem could be and if u don't know just say ur not sure right now. seems like admin on cop are like admin on ow. they just don't reply unless they actually add content or giving away something

[Dakarith]

I just want to be able to play the game.

[AntiLock]

i deleted cop and reinstalled and got the new .net 3.5. what else can i check

after i download it and click on launcher to open cop up i get this error....

unhandled exception has occured in your applicaion. if u click continue,the application will ignore this error and attempt to continue. if u click quit,the application will close immediately.....The application has failed to start because its side-by-side configuration is incorrect. Please see the application even log for more detail


See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ComponentModel.Win32Exception: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail
at System.Diagnostics.Process.StartWithShellExecuteEx (ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at Launcher.Form1.button1_Click(Object sender, EventArgs e)
at Launcher.Form1.AutoStartTimer_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr oc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Launcher
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Crowns%20of%20Power/Launcher.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

I just Wanna play CoP but this same thing happens to me

[Pat2]

I'm being nosy but are you in admin mode on Vista?

Have you deleted all prefetch files and cleaned you registry, then tried a cold boot?

Pat

[me_chimp]

yes i deleted everything that had to do with cop. and i just tried running as admin and still the same problem

[Dakarith]

I just downloaded the game on another computer and Im getting this error....

C:\WINDOWS\Microsoft.net\Framework\v2.0.5072\mscor wks.dll could not be loaded

I dont even know what that means. Can anyone help me please?

[justin_82]

I have downloaded COP and all of the available updates. But whenever I try to play COP I get to where I click on my player I want to play with and when it goes to log onto the server it just freezes. Can someone please help me out with this matter. I would really love to play this game, but have been unable too.

[12JD12]

Hey,
I used to be a Beta-Tester, but with school i had to stop playing for a while.. Now that im back, i downloaded the new game client and it updated to patch 1.3.0 sucessfully. I created a new character and selected Synge, however while its load initial data i get the following error message:

(invalid packet GameBase::unpackUpdate())

Once i click ok, i am returned to the login screen

If you could shed some light on how to fix this error i would be grateful, as i'd love to see whats changed since ive been gone, and get back into the game...

Cheers

[s0nsoftheworld]

I've been trying to play the game for quite some time now, and i still cant play it. It shows a black screen, then just disappears, and when i look at my task manager it uses up like 90 percent of my computer...so simply put...wth

how can i fix this?

[blazo]

We have updated our launcher, this may fix problems some of you had. Please download, install and try playing crowns of power again if downloading and updating via the patcher doesn't work. More help is on the way for those who can not get in, we won't forget about you.

[boey55555]

when i click play on my Cop it says error going to specific mode nd closes out what can i do...

[manofwill0147]

when i press play and error comes up saying Hardware failed to switch to specified mode. I reinstalled cop and i was able to log in again but after i closed it and tried to open the same thing came up again

[madquest1]

Ive loaded all updates and get this every time I try to open it.

torque memory error

Error allocating memory. Shutting down.

Its got my CPU usage to 100% then craps out.

[blaze]

I tried to get this game working on another pc that is running XP pro sp3 and it downloaded installed and updated fine BUT when i click play it brings up a black screen then goes back to the desktop and it shows that CoP is running in the processes but its using 100% of my cpu then it starts to tapers off using less and less but the commit charge is on the rise. i have to end process.. any solutions to this problem?

[mudcat]

intall went fine but when trying to launch i keep getting 'error connecting to patch server'.
what can i do?

I have the same problem is there a fix for this?

[elecjester]

turn off your antivirus / firewall

[LEADER]

is cop going to have a version for linux at some point or will it just be for windows

[elecjester]

I haven't heard anything about a linux version personally.

I think they were trying to make a MAC version, and of course there is the PC version (obviously), but no mention of a Linux one.

There are programs however that can you let run PC games in a Linux environment.

[SilentSlanger]

I get a different launcher problem. It crashes as soon as I run the application.

I have update .NET Framework, and Windows Installer. I've never had this problem before:

[ThugmaN3000]

the download went fine got the net framework 3.5 and i have windows installer 3.1 but when i press play the screen flashes and i get a Torque memory error that says Error allocating memory. shutting down so i press ok and then i get a CoP.exe - Application error and it says The instruction at "0x7c90100b" referenced memory at "0x00de0064" the memory could not be "read" please help me Thanks

[moosier89]

same thing happens to me i downloaded the new patch and all i get is a black screen then brings up the error stuff

[ThugmaN3000]

the download went fine got the net framework 3.5 and i have windows installer 3.1 but when i press play the screen flashes and i get a Torque memory error that says Error allocating memory. shutting down so i press ok and then i get a CoP.exe - Application error and it says The instruction at "0x7c90100b" referenced memory at "0x00de0064" the memory could not be "read" please help me Thanks please can any1 tell me how to make it work because idk whats wrong

[astonmartinrider1]

I keep getting "this file contains invalid data." Every time i try running the program.

[SweetMarie]

intall went fine but when trying to launch i keep getting 'error connecting to patch server'.
what can i do?

I am having the same problem on my laptop.

[Shroomz]

OK I Load Up The Game And It Says Problem Loading Patch Server Please Try Again Later But I Reinstalled And Waited A Wile Same Problem Please Help Me Out Bro!!!!

[Mordark]

C:\Program Files (x86)\Crowns of Power\main\data\missions\PlaneOfNature.ml: unknown version

and it won't let me update COP so I can't get online with my account.

[roxyG]

When I open the file up it says an error message "this file contains invalid data"

I've tried to download this 4 times now, i'm on my 5th time, it could be that the file wasn't downloaded properly, but my internet was connected overnight last night and when I got up this morning and had a look it was completed... apparently.

Regards.

[DELeater]

Seems like old problem. I open the launcher and it says new version is available. I press OK, i need it. Download window opens but after a min nothing happens and then error window occurs saying something went wrong and program will be closed. My win installer has version over 3.1, i have .Net Framework 1, 2 and 3.5 and still i can't download new version. Hope u resolve that problem for me soon ))

[stinkFisl]

i just got a 32 inch plasma screen tv/computer and i try to dowload crownsofpower and it shuts it off each time. and my kp/sec keeps going down . can someone help me with this plz? ty

[stinkFisl]

ok i downloaded cop yesterday i get on this morning. and i try to open cop and click play when i do screen turns black and saids not formatted format and hardware failed to sitch to specified mode? idk what to do. someone plz help...!!! TY

[High_Lord_Akkadia]

I've got cop installed and updated. I have all the files I need, and I'm running xp pro. Went I press play it flashes black then put an error report that reads:

CoP.exe has encountered a problem and needs to close. We are sorry for youer inconvenience.

Any help would be gladly taken.

[xShakespeery]

How Much Ram Do U Need To Run Program?

[b0b_6uy]

Yesterday when I tried to download the 1.7 patch, the launcher crashed, so I tried again and got the same results. The third time I opened the launcher I got a side by side configuration error. Since then I have tried re-downloading and installing, and when i try to download the first patch the launcher throws at me, i get an error:

c:\Program Files\Crowns of power\main\client\ui\GUIClaim.gui:
unknown version.

Not a clue what this means, everything had been working perfectly for 1 and a half+ weeks.

Oh yeah, I never get that side by side configuration error anymore.

does the admin even check this anymore? I read all 9 pages of this thread and it does not seem like it...

[mudcat]

I'm having the same problem as bob_6uy can anyone help.

[BiPolarGod]

Here is the msg im getting when trying to use the link from this post.


This program cannot update the instlled version of crowns of power because of the following reason c:\ program files\ crowns of power \main\client\ui\gui claim.gui: unknown version

I really would like someone to let us know what we can do to get this fixed..

[b0b_6uy]

of course admin is not online...

this sux. the error has to happen on the first day of my winter break!

great game btw... :\

[TehNo0b]

If you guys are getting unknown versions on specific files i would personally suggest deleting those particular files.. if your worried about the potential outcome of messing things up while doing this, or don't trust me.. make some backups of these files lol

I think that should fix it though.

[IMMMORTAL]

After applying the last patches :
"This application failed to start because the application configuration is not correct. Reinstalling this application may fix this problem."

Uninstalling it and making all backfrom scratch ended at the same point.

Last patch didnt work like all the others, it was running in a cmd console and crash...

Is there a workaround for this ? - 'cause i am stuck.

[blazo]

If you are still having problems, download the latest version of the game at: http://www.crownsofpower.com/downloads.php When download is complete, run and complete the install process. You should now be able to play.

As of version 1.7.0 the new launcher should fix some problems people have had installing the game in the past. If you have downloaded and reinstalled and still have problems, please post them here.

[xXxBonesXxX]

i download game and install just fine on my computer. for a while i played it but then had to reistall windows cause i file went missing. everything was exactly the same and when i reinstall cop and try and play now it says that side by side configuration is incorect. can someone help me out please it would be gratefully appreciated

[blazo]

If you get the error "The application failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem." it means you need to install the C++ runtime libraries from Microsoft:

http://www.microsoft.com/downloads/details.aspx?FamilyID=200B2FD9-AE1A-4A14-984D-389C36F85647&displaylang=en

Install those and you should be able to run the game.

[xXxBonesXxX]

i just fixed my prob and was logging on to post solution..... by the way if your running vista there are 2 diffent runtime libraries that could be the right program you will need either 32 bit or 64 but you will have to uninstall the program then resinstall after you install runtime library or atleast i had to

[puda]

windows XP>vista

[NoS]

when i press play the screen flashes and i get a Torque memory error that says Error allocating memory. shutting down so i press ok and then i get a CoP.exe - Application error and it says The instruction at "0x7c90100b" referenced memory at "0x00de0064" the memory could not be "read"

so....whats the way to resolve this? i checked and saw nothing on this :)

[Unkn0wnEnt1ty]

I've been an outwar player since like.. Round 1.. Round 2... Somewheres in there, and I just recently got back into it. So, I see this CoP all over the place and I decided to download it and give it a go. Seems like others are having the same issue I am. Which my issue is that, I run the launcher and my monitor seems to load the program, then it doesn't. As I enter my task manager it shows that CoP is running and taking up most of my memory/RAM so I end the process. I have done what you said Blazo about restarting and launching the actual luncher in the CoP directory, Hell.. I even launched it as Administrator, and nothing... same issue. I mean, if I can play WoW on this PC with a 20+ FPS rate, I should be able to play this game. So if you can come up with any new information on how I may be able to run the program, it'd be very helpful.

[Frenchy96]

after i downloaded the primary download a box comes up and says run so i click it then another box comes up and says this file contains invalid data so it wont let me go to the install part. do i have to download the back up sever?
thanks

[gamael]

When I hit play for CoP my entire screen goes black then it returns to normal and doesnt show the game running. I ctrl delete after a while and it says its running under applications but thats all.

[gamael]

I have noticed that my error is the same as others and I have read through this entire post and still no one has given a solution to this error and it has been mentioned many a time.

[gamael]

UGH SOMEONE FRIKIN ANSWER! I mean seriously what kind of support is this when quite a few people have had the same problem and no one has fixed it or post a fix that is already out.

[gamael]

going to keep posting messages once a day until someone posts a fix or something >:|

[gamael]

post asking for help and this will continue until someone at least attempts to help!

[skillz4life]

i login and i choose which character i want to play on and after it gets down loading the world it will just stay on the loading screen. why is it doing this and how do i fix it?

[skillz4life]

if u can help me plz message me at ihbpandmslm@yahoo.com?
put the title down as CoP help.

im thinking i have to uninstall and reinstall but ill try

[skillz4life]

i uninstalled it and then reinstalled and it still loads fully to the world but it just stays there then goes to my login screen saying it disconnected me and took a "Time Out"

[Pachil]

When I try to login on my character I get this message:
(Invalid Packet GameBase;;unpackUpdate())
What should I do?
Note:This is after I downloaded newest patch

[Pasterza]

when i press play the screen flashes and i get a Torque memory error that says Error allocating memory. shutting down so i press ok and then i get a CoP.exe - Application error and it says The instruction at "0x7c90100b" referenced memory at "0x00de0064" the memory could not be "read"

so....whats the way to resolve this? i checked and saw nothing on this :)

I've the same problem. Can someone help me with this?

[mushroomhead]

i can't get CoP to load right on my vista OS. its x64 version and i've already installed the runtime libraries, installer, and framework. is there anything else i can try before i go back to an XP OS?

[Rampid_Justin]

i can't get CoP to load right on my vista OS. its x64 version and i've already installed the runtime libraries, installer, and framework. is there anything else i can try before i go back to an XP OS?

When did you download it?

[Vincent]

When I try to login on my character I get this message:
(Invalid Packet GameBase;;unpackUpdate())
i have uninstalled it and when i download it again and install it and the update, i get this msg, how do i fix this?

[SmiterOfFoes]

When I try to login on my character I get this message:
(Invalid Packet GameBase;;unpackUpdate())
i have uninstalled it and when i download it again and install it and the update, i get this msg, how do i fix this?

I also receive this error when I try to log on.

[Vincent]

does the admins check this thread anymore? it would be nice if they gave an update as to whether or not they are looking into the problem that i am having and that i see other people are having as well, my post is two posts up.... and over two weeks ago...

[Arrekusumccue]

Originally Posted by Vincent View Post
When I try to login on my character I get this message:
(Invalid Packet GameBase;;unpackUpdate())
i have uninstalled it and when i download it again and install it and the update, i get this msg, how do i fix this?

I am getting same thing as well. i just dl game yesterday, and have been looking for solution since i got it. Please get back to me

[olivercutlass]

Originally Posted by Vincent View Post
When I try to login on my character I get this message:
(Invalid Packet GameBase;;unpackUpdate())
i have uninstalled it and when i download it again and install it and the update, i get this msg, how do i fix this?

I am getting same thing as well. i just dl game yesterday, and have been looking for solution since i got it. Please get back to me

I am also having this same problem! I downloaded the game and patch no problem, but after i choose my character and start loading the server i get the error message above :(

Please Help!

[Kakarot]

ya seems plenty of us are having this problem and i see 0 awnsers from the admin on this problem its been going on since yesturday we gotta wait till next week for something to fix this issue ???

[Kakarot]

im sorry but i have to post this why do admin put out a patch without even testing it to see how much of an affect it would have against other users, you do know that no everyone is running the same op system so people getting this error are getting no help and others are just continuing to play while everyone else gets a hand up there ass. im sorry test your patches 1st this is friggin dumb as hell

[startrek30]

I'v wasted over 20 hours trying to fix this issue but in vain , cudnt reach anyy thing , i'v downloaded the updates 11 times , uninstalled / Reinstalled Cop in different direction like 8 times , i formated C and installed a fresh windows XP , i'v downloaded the game from cop.com , nothing helps :|

The weired thing that the game is workin for alot of ppl , and for the admins too :|

I say its a problem abt the updating system ..

[Kakarot]

well its not just this patch that this has happend with ive had problems with prolly the last 3-4 patches the have impletmented so im guessing they dont test them to see if they work for all OS cause if they did they wouldnt have about 10-20+ people having the same dam problem

[ardous]

well im new to CoP i used to play during the beta face. got out of it real quick and well im trying to play it. i downloaded everything they asked, and the download went by real slow, which is very new for me, but other then that the download had no problems, installing it FLEW, but when i want to log in i dont see the login button, or the news thing, can i get any insight on any possible ways to log in? i have redownload it like 59859859 times, and uninstalled each time. :mad:

[Kakarot]

sry to say this guys and gals but i dont think the admin give a craps about us cause we havent seen any words from them i have not recieved any response on wtf is going on cause of this patch

[Elwood]

sry to say this guys and gals but i dont think the admin give a craps about us cause we havent seen any words from them i have not recieved any response on wtf is going on cause of this patch

See thats the thing, you send negative attitude towards admins.. you really think they want to help you out? Same reason nobody that plays the game wants to help you out is because your whining over something that can be fixed if you have "Patience" which you do not have.

[Kakarot]

lmfao elwood why not just shutup you think theres paitence on games lmfao. you see how this thread and many others were made as soon as the patch was released and problems occurd lmfao. ****ing retard

[andylord]

ok those who still having this problem feel free to add me on andylordow@yahoo.co.uk

otherwise follow these steps:

Uninstall cop
Open you C drive find the cop delete everything you can inside (If your on a different drive other C drive it may cause problems)
Delete any previous installs, patches
Again search your C drive for any files left behind and delete them as some have proved to create conflicts.
download cop straight from crownsofpower.com
install cop
Manually!!!!! download cop patches from http://forums.rampidgaming.com/showthread.php?t=5340
Or if your felling lucky then try the Launcher (Manually comes out with most results)
Launch Cop
Check the number in the top right hand corner
If it says todays recent patch your good to go if it doesnt go back to patching
You should be good to play

If it doesnt work contact me


if all this doesnt help im sorry you will have to wait for admins to patch it

34 and counting helped ;)

Edit: Do not pm me on this forum i dont check it often enough and dont reply here without it leading to another thread or email/Instant messanger

[lebber]

I downloaded the game,, the auto patcher worked,, and i started the game... The friggin screen goes in and out of black and blue,, then it quits.. About 5 minutes l8tr the first message popped up saying

"Torque Memory Error"
-Error allocating memory.Shutting Down.

and then,,,

"cop.exe Applications Error"
-the instruction at "0x7c901010" reference memory at "0x08e90064". Memory couldn't be read.Click ok to terminate.

what the crap?! atleast i could have gotten a common error like in the forums..

[atvoutlaw]

i'm getting the error message that is supposed to be associated with the c++ library download. (c:\program files\crowns of power/cop.exe - fromlauncher failes error 14001. application has failed to start because the application configuration is incorrect. reinstalling the application may fix this problem. i downloaded the c++ library file and it didn't not fix anything. i reinstalled the cop client and still nothing. please help

[tommydanger]

my patch download stopped at 99% 38943360 of 39009748 bytes 99%

?

wtf? anyone?

[blazo]

Are you still having this issue?

[Faked]

This thread was made to help troubleshoot any problems that may occur during the download process or the installation of Crowns of Power on to your computer.

Attached are screen shots of 2 errors that can be fixed by downloading the updated drivers from Microsoft. Links are provided on the CoP Downloads Page: http://www.crownsofpower.com/downloads.php

Please describe the problem you are having and provide links to screen shots if possible.

I have a quad laptop here and it still doesn't let me play cop whats the reason?

[TehNo0b]

I have a quad laptop here and it still doesn't let me play cop whats the reason?
Judging by your post and lack of any sort of information it is impossible for anyone to know. Try posting some of the actual problems your having with actual error quotes or whatever.. if i was supposed to guess why it don't work i would have to say the problem is you not the pc itself.

[fezz]

I downloaded the game,, the auto patcher worked,, and i started the game... The friggin screen goes in and out of black and blue,, then it quits.. About 5 minutes l8tr the first message popped up saying

"Torque Memory Error"
-Error allocating memory.Shutting Down.

and then,,,

"cop.exe Applications Error"
-the instruction at "0x7c901010" reference memory at "0x08e90064". Memory couldn't be read.Click ok to terminate.

what the crap?! atleast i could have gotten a common error like in the forums..

same prob here any ideas?

[keysx]

I have a quad laptop here and it still doesn't let me play cop whats the reason?

If you want to provide some useful information like your laptop's stats (particularly the amount of RAM you have) and what actually happens when you try to run the game we'd be glad to help you out.

same prob here any ideas?

Same, how much RAM do you have?

[fezz]

firstly i click play button and the whole screen goes black for a split second then i get the torque memory error with error allocating memory, shutting down..

i have 3Gb ram :S

[keysx]

Hmm, that should be plenty. What do you have for a video card?

[fezz]

got it now i needed to update the drivers but thanks anyways :P

[keysx]

awesome glad to hear it.

[bmlsoccer12]

My download was going fine until it hit 33%.. then it just stopped going up. The downloading page is still up and the little paper is flying between the folder and internet, but it just says 27 minutes 50 seconds left. Doesnt move.

[steve08]

i get this message:

Crowns of Power has not been totally installed because of the following reason:

main\data\music\final_call60.ogg: this file contains invalid data.(error 11 FD)

You will have to run this utillty again to completely install crowns of power

does anyone know how to fix this

[madmuis]

I've had the same thing multiple times, with another file ofc

[steve08]

does anyone know how to fix my problem

[xiiAlucardiix]

I recently installed windows 7 and at first i got the same message as Steve08 but i would get it in game, a message would say please locate file to continue, however now i cant even get the game to start. when it starts to load my location after i login it will crash and close

[xmafiaxx]

I dont know what my problem is.
Its say: This program cannot update the installed versiom of Crowns of Power, because of the following reason:
C:/Program Files/Crowns of Power/main/data/missions/CTFv2.ml:unknown version.

Can someone please tell me what to do?

[yneos]

go though your files. C > program files > cop > main > data > missions and delete ctfv2.ml

[mushroomhead]

I dont know what my problem is.
Its say: This program cannot update the installed versiom of Crowns of Power, because of the following reason:
C:/Program Files/Crowns of Power/main/data/missions/CTFv2.ml:unknown version.

Can someone please tell me what to do?
i've been getting the same error and still can't get it to work right....

[mushroomhead]

awesome, that worked great. TYVM, from sycodelics on lightsythe server.

[jbspicer]

when i try and run it, it says this.
torque memory error
error allocating memory. shutting down
and then this
the instruction at "0x7c90100b" referenced memory at "0x01f50064". the memory could not be "read". click on ok to terminate the program
what do i do to get this to work?

[yneos]

sounds like you MAY have bad ram. try a Ram cheker and see if its so. if it is replace your ram. (alot of ram is under life time warrnity if your cheap like me)

[The-Almighty]

sounds like you MAY have bad ram. try a Ram cheker and see if its so. if it is replace your ram. (alot of ram is under life time warrnity if your cheap like me)

im not too high tech but when i check my RAM, what am i looking for to see if its good or not. I mean is tehre a certain number I need to be at?

[yneos]

its a program. http://hcidesign.com/memtest/

a free crappy one but it works. i found better one's in the past. but this should work as soon as you log onto your PC. close out of anything you dont need. stop running any programs in your lower right corner. and run that. if you have even 1 error you ram is unacceptable.

[roddbagg31]

Hi my name is roddbagg if downloaded the game but its not showing up on my desktop please help me thanks

[Crow]

yeah right

[Tregus]

Any suggestions ppl? This is a fresh install/patching of client and this is the first time I've ever installed COP so shouldn't be any issues with preexisting files or some such. Any suggestions would be appreciated.

[yneos]

open my computer. click on the C drive, then program files, crowns of power, main , client, ui, and delete guiaddaasurvival.gui.dso

[Tregus]

Thank you Yneos. Is that the general fix for any file causing that same response then?

*Fixed it, Thanks again*

[Paladin016]

unfortunately yeah u gotta do that, and if u delete the wrong file accidently, you have to redownload the game and repatch it all over lol!

[Vigor]

In the middle of the download i canceled it due to what i read in forums. ie: cop sucks, and has no staff..

[Amerigo]

I just downloaded and installed the program. The prerequisites were already installed, but I installed them again just to make sure.
After installing, it popped up saying that updates were available.. those installed without a problem.
Then, when I click 'Play', I get this message: "Execution of command 'C:\Program Files\Crowns of Power/cop.exe -fromLauncher' failed (error 193: unknown error c1)
Attempting to run from the desktop shortcut gives the same error.
I have uninstalled, redownloaded, and reinstalled everything twice and still get the same.